JVL MIS17 Series User Manual page 85

4.1
4.1.9 Scope Function
This function is not available yet!.
The Scope function is an excellent and necessary function for testing a new application
or finding errors in an existing system.
The Setup has to be selected to set up the Scope function correctly before use. Most reg-
isters in the MIS motors can be selected for viewing, different trigger functions can be
selected, saving and loading scope pictures is possible, etc.
JVL Industri Elektronik A/S - User Manual - Integrated Stepper Motors MIS17x, 23x, 34x, 43x
Using the MacTalk software
85