Getting Started With Programming - JVL MIS17 Series User Manual

9.1

Getting started with programming

When using the MIS motors, almost any kind of program can be created using a set of
user friendly icons.
Make the required choice on the eRxP Programming tab.
The name eRxP refers to the programmable module (R-module) from the MAC motor
series. [e]mbedded [R]-module number [x] [P]rogramming
After making one of these 2 choices, the program window will be opened.
!
Please note: When a program is made and stored the motor will always startup in po-
sition mode. If this is not convinient insert a Mode = "passive" on first program line.
236 JVL Industri Elektronik A/S - User Manual - Integrated Stepper Motors MIS17x, 23x, 34x, 43x