JVL MIS17 Series User Manual page 40

2.8 How to connect a MIS motor
2.8.3 Cables for the MISxxxxxx
The following cables equipped with M12 connector can be supplied by JVL.
MISxxx Connectors
"PWR" "CN2" "CN3"
5pin 5pin 8pin
Male Female Female
X
X
Not relevant. The RS485-USB-
ATC-820 connect to CN2 through
cable type RS485-M12-1-5-8
X
X
X
X
Protection caps. Optional if connector is not used to protect from dust / liquids.
X X
X
40 JVL Industri Elektronik A/S - User Manual - Integrated Stepper Motors MIS17x, 23x, 34x, 43x
Description
"CN4"
17pin
Female
RS485 Interface cable. Connects
directly from the MIS motor to a
RS485 comport.
Length: 5m (197 inch)
RS485 Interface cable. Connects
directly from the MIS motor to a
RS485 comport.
Length: 5m (197 inch)
USB to RS485 Converter. To be
used if no RS485 COM port is avail-
able.
Cable (Ø5.5mm) with M12 male
5-pin connector loose wire ends
0.35mm² (22AWG) and foil screen.
Length: 5m (197 inch)
Same as above but 20m (787 inch)
Cable with M12 male 8-pin connec-
tor loose wire ends 0.35mm²
(22AWG) and screen.
Same as above but 20m (787 inch)
Cable with M12 male 17-pin
connector loose wire ends
X
0.22mm² (24AWG) and screen.
Length: 5m (197 inch)
X
Same as above but 20m (787 inch)
Junction box for splitting the 17 pin I/
O connector into 4 independent con-
nectors. Include also 9 LED's for
X
monitoring the I/O status and com-
munication.
Cable length: 0,5m (20 inch)
IP67 protection cap for M12
X
female connector.
IP67 protection cap for M12
male connector.
Q5
xxxx
JVL Order no.
RS485-M12-1-5-5
RS485-M12-1-5-8
RS485-USB-ATC-820
WI1000-M12M5T05N
WI1000-M12M5T20N
WI1000-M12M8T05N
WI1000-M12M8T20N
WI1009-M12M17S05N
WI1009-M12M17S20N
PA0190
WI1000-M12FCAP1
WI1000-M12MCAP1
Picture
TT2333-01GB
36.0mm
[1.42 inch]
54.0mm [2.126 inch]
= Mounting holes
0
5.0mm
[0.197inch]
2 x
Ø4x8mm
[Ø0.16x0.32inch]
2 x
Ø4/8mm
[Ø0.16/0.32inch]
77.0mm
[3.031inch]
112.0mm
[4.409inch]
118.0mm
[4.646inch]
TT3088-01GB