JVL MIS17 Series User Manual page 17

2.1
2.1.7 Dimensioning power supply and pre-fuse - MIS23x/MIL23x motors
Note that this manual only covers MIS23x generation 2 motors.
The power supply must be dimensioned according to the actual motor size.
The size of the pre-fuse also depends on the actual model of the MIS motor.
Use the following table to select the power supply size and fuse ratings.
Supply
voltage
-
12VDC
24VDC
48VDC
72VDC
Recommended
power supplies
Supply
voltage
-
12VDC
24VDC
48VDC
72VDC
Recommended
power supplies
* = Worst case scenario at higher velocities. Less may also do. Consult the torque/power curves in the
appendix to get more precise info.
** = Not recommended for new designs.
See also the appendix
plies that JVL offers.
JVL Industri Elektronik A/S - User Manual - Integrated Stepper Motors MIS17x, 23x, 34x, 43x
Power Supply
MIS231S
/MIL231
Supply Fuse size
rating
80W * T4A
130W * T6.3A
240W * T6.3A
370W * T6.3A
PSU24-075 **
PSU48-240 **
PSU72-1000 **
PSU80-4 **
MIS231T
(High torque)
Supply Fuse size
rating
110W * T6.3A
160W * T8A
300W * T8A
390W * T8A
PSU24-075
PSU48-240
PSU72-1000
PSU80-4 **
Power Supplies, page 341 which shows the standard power sup-
MIS232S
/MIL232
Supply Fuse size
rating
70W * T6.3A
110W * T6.3A
240W * T6.3A
350W * T6.3A
PSU24-240 **
PSU48-240 **
PSU72-1000 **
PSU80-4 **
MIS232T
(High torque)
Supply Fuse size
rating
100W * T6.3A
150W * T8A
320W * T8A
450W * T8A
PSU24-240
PSU48-240
PSU72-1000
PSU80-4 **
MIS234S
/MIL234
Supply Fuse size
rating
60W * T5A
100W * T5A
200W * T5A
300W * T5A
PSU24-240 **
PSU48-240 **
PSU72-1000 **
PSU80-4 **
17