5.3
The allowed maximum current that can be used when the motor is running is setup in
the "Running current" register which is found at the main tab in the left side.
Notice that when using the closed loop current control feature only the "Running current
setting is used".
The "Standby current" and "Standby time" setting is
JVL Industri Elektronik A/S - User Manual - Integrated Stepper Motors MIS17x, 23x, 34x, 43x
Closed loop operation
Running current can be set here
Standby current and Standby time is not used
when current control and closed loop is enabled.
Only MISxxx---H2/H4---
not
used at any time.
TT2370-01GB
101