JVL MIS17 Series User Manual page 250

9.7 Graphic programming command reference
9.7.9 Set outputs
Icon:
Dialogue:
Function: Sets one or more outputs. When setting a single output, you can set it to high,
low, or you can specify the length (in milliseconds) of a pulse to send out on
that output. When setting multiple outputs, you can specify whether to set
each output high, low, or leave it in its current state.
250 JVL Industri Elektronik A/S - User Manual - Integrated Stepper Motors MIS17x, 23x, 34x, 43x