JVL MIS17 Series User Manual page 26

2.3
2.3.2 Analogue input filters
An analogue signal is not always fully stable and may fluctuate a bit. Also general noise and
sudden spikes from other equipment can be a problem.
To help filtering an analogue input signal the MIS have an advanced input filter function.
This can be setup as follows.
2.3.3 Analog filter setup with MacTalk:
It is strongly recommended to setup the analog input filtering using MacTalk. The setup
dialog is found in the menu Motor -> Filter setup, or the "Filter setup" button on the
toolbar.
Write the settings for each Input and click 'OK'. The parameters can afterwards be
"Saved in motor".
26 JVL Industri Elektronik A/S - User Manual - Integrated Stepper Motors MIS17x, 23x, 34x, 43x
Analogue Inputs