JVL MIS17 Series User Manual page 46

2.8 How to connect a MIS motor
2.8.7 Cables for the MISxxxxxx
The following cables equipped with M12 connector can be supplied by JVL.
MIS34x Connectors
"PWR" "CN2" "CN3"
5pin 5pin 8pin
Male Female Female
X
Not relevant. The RS485-USB-
ATC-820 connect to CN2 through
cable type RS485-M12-1-5-8
X X
X X
X X
This cable only exist in 5m length
Protection caps. Optional if connector is not used to protect from dust / liquids.
X X
X
46 JVL Industri Elektronik A/S - User Manual - Integrated Stepper Motors MIS17x, 23x, 34x, 43x
Description
"CN4"
17pin
Female
RS485 Interface cable. Connects
directly from The MIS motor to a
X
RS485 comport.
Length: 5m (197 inch)
Cable (Ø5.5mm) with M12 male
5-pin connector loose wire ends
0.35mm² (22AWG) and foil screen.
Length: 5m (197 inch)
USB to RS485 Converter. To be
used if no RS485 COM port is avail-
able.
Cable (Ø5.5mm) with M12 male D-
coded 4-pin connector loose wire
ends 0.35mm² (22AWG) and foil
screen. Length: 5m (197 inch)
Same as above but 15m (590 inch)
Cable (Ø5.5mm) with M12 male D-
coded 4-pin connector and RJ45
connector.
Length: 5m (197 inch)
Cable with M12 male 17-pin
connector loose wire ends
X
0.22mm² (24AWG) and screen.
Length: 5m (197 inch)
X
Same as above but 20m (787 inch)
IP67 protection cap for M12
X
female connector.
IP67 protection cap for M12
male connector.
Ex
xxxx
JVL Order no.
RS485-M12-1-5-17S
WI1000-M12F5T05N
RS485-USB-ATC-820
WI1046-M12M4S05R
WI1046-M12M4S15R
WI1046-M12M4S05-
NRJ45
WI1009-M12M17S05N
WI1009-M12M17S20N
WI1000-M12FCAP1
WI1000-M12MCAP1
Picture
TT2333-01GB