JVL MIS17 Series User Manual page 168

7.2
7.2.2 Reading the Event log
In MacTalk it is possible to monitor all the saved data. This tab shows the total amount
each error has occurred, the last 20 errors with time stamps, total amount of revolutions
the motor has run during the entire lifetime etc.
The motor do not have a real time clock so all time stamps are based on the active time
where the motor has been powered also showed as "Up time".
168 JVL Industri Elektronik A/S - User Manual - Integrated Stepper Motors MIS17x, 23x, 34x, 43x
Error messages