JVL MIS17 Series User Manual page 14

2.1
2.1.4 Power Supply Grounding and Earthing
It is mandatory that the motor flange is connected to earth. Also it is mandatory that the
earth is connected to GND/Common at a central point near the power supply.
The P- (GND/Common) is internally connected to the motor chassis/housing. Also the
outside body at all M12 connectors is connected to the chassis/housing and thereby to
the P- (GND/Common).
The illustration below shows how to make a good power and earth connection of the
MIS motor.
14 JVL Industri Elektronik A/S - User Manual - Integrated Stepper Motors MIS17x, 23x, 34x, 43x
Power Supply