JVL MIS17 Series User Manual page 50

2.8
2.8.10 Drawing and description of PA0190
Junction box that splits the signals in the MIS motors "CN4" 17 pin I/O connector into 4
individual connectors giving an easy and more flexible installation.
Usage hints:
The LED's will only work with a MIS motor where the OUT+ and IO- is supplied from
the CN4 connector. See also the I/O description for the module.
If a cable is connected to the "BYPASS" then the Communication pins and GND must be
properly connected to valid signals (pins 2,15,17). AND "COM" must not be used. In
other words use EITHER the "BYPASS" OR the "COM" connector. Not both.
50 JVL Industri Elektronik A/S - User Manual - Integrated Stepper Motors MIS17x, 23x, 34x, 43x
How to connect a MIS motor
TT3088-01GB
36.0mm
[1.42 inch]
54.0mm
[2.126 inch]
= Mounting holes
0
5.0mm
[0.197inch]
2 x
Ø4x8mm
[Ø0.16x0.32inch]
2 x
Ø4/8mm
[Ø0.16/0.32inch]
77.0mm
[3.031inch]
112.0mm
[4.409inch]
118.0mm
[4.646inch]