JVL MIS17 Series User Manual page 16

2.1
2.1.6 Dimensioning power supply and pre-fuse - MIS17x motors
Note that this manual only covers MIS17x generation 2 motors.
The power supply must be dimensioned according to the actual motor size.
The size of the pre-fuse also depends on the actual model of the MIS motor.
Use the following table to select the power supply size and fuse ratings.
Supply
voltage
-
12VDC
24VDC
48VDC
72VDC
Recommended
power supplies
* = Worst case scenario at higher velocities. Less may also do. Consult the torque/power curves in the
appendix to get more precise info.
** =Not recommended for new designs.
See also the appendix
plies that JVL offers.
16 JVL Industri Elektronik A/S - User Manual - Integrated Stepper Motors MIS17x, 23x, 34x, 43x
Power Supply
MIS171
(All types)
Supply Fuse size
rating
35W * T4A
70W * T3.15A
90W * T3.15A
110W * T2A
PSU24-075 (24V/75W)
PSU24-240 (24V/240W)
PSU48-240 (48V/240W)
PSU80-4 (80V/400W) **
Power Supplies, page 341 which shows the standard power sup-
MIS173
(All types)
Supply Fuse size
rating
40W * T4A
70W * T4A
125W * T4A
165W * T3.15A
PSU24-240 (24V/240W)
PSU48-240 (48V/240W)
PSU80-4 (80V/400W) **
MIS176
(All types)
Supply Fuse size
rating
40W * T4A
70W * T4A
150W * T4A
220W * T4A
PSU24-240 (24V/240W)
PSU48-240 (48V/240W)
PSU80-4 (80V/400W) **