Feature Overview - JVL MIS17 Series User Manual

1.1
The compact MIS motors are designed for
easy installation and high performance use.
A large number of features are available and
also multiple options available as listed below.
• Serial RS485 or 5V serial position control-
ler.
• Build-in mini PLC with graphic program-
ming.
• Option for CANbus, CANopen DS-301.
Fully ISO 11898-2:2016 compliant/(DSP-
402 in development).
• Options for EthernetIP , Profinet, Power-
link, ModbusTCP , SercosIII and EtherCAT.
• A dual supply facility is available so that
position and parameters are maintained at
emergency stop.
• Electronic Gear mode.
• MACmotor protocol so MAC servomo-
tors and MIS stepper motors can be con-
nected on the same RS485 bus.
• Command for easy PLC/PC setup and
communication.
• Power supply 7-72 VDC.
• Extremely high torque vs speed - up to
3000 RPM with good performance.
• Fixed 409600 steps per revolution
• Built-in 32Bit μprocessor with 8 In/Out
that can be configured as inputs, PNP out-
puts or analogue inputs. 5V serial and
RS485 interface for set up and program-
ming.
• MODBUS interface.
• 9.6kbit/sec. to 1Mb/sec. communication.
6 JVL Industri Elektronik A/S - User Manual - Integrated Stepper Motors MIS17x, 23x, 34x, 43x

Feature overview

Benefits when using the MIS motors:
• De-central intelligence.
• Simple installation. No cables between
motor and controller/driver.
• EMC safe. Switching noise remains
within motor.
• Compact. Does not take space in the
control cabinet.
• Low-cost alternative traditional systems
where motor and controller is sepa-
rated.
• Option: Closed loop feature by means
of magnetic encoder with resolution of
up to 4096 pulses/rev. (H2 or H4
option)
• Option: Absolute multi turn encoder
for keeping the position permanent also
during power down. (H3 or H4).
• Vibration tested at 4G in 3 axis and
shock tested at 15G in 3 axis according
to IEC60068.
• Interface possibilities:
• From PC/PLC with serial commands via
5V serial or RS485.
• Pulse/direction input. Encoder output.
• CANopen.
• 8 I/O, 7-28VDC that can be configured
as Inputs, Outputs or analogue inputs.
• Wireless options: WiFi, Bluetooth and
Zigbee.