Led Indicators Basic Motor - JVL MIS17 Series User Manual

2.9
2.9.1 LED's - description for products without Ethernet or CANopen.
This description covers all MIS motors with basic configuration without any Ethernet or
CANopen such as MISxxxxxxQ5xxxx, MISxxxxxxQ9xxxx, MISxxxxxxFBxxxx, or
MISxxxxxxEWxxxx.
The LED's are used for indicating states and faults.
Power indicator
Error indicator
LED indicator descriptions (default setup)
LED Text Colour Constant off
L1
L2
L3
ERR
PWR
L1, Red, shows by default the Status bit 15: Closed loop lead/lag detected. It tells if the mo-
tor is overloaded, which can be caused of too low Running current or too heavy load.
L1 to L3 can be configured to show the status of a almost any single bit from a user de-
fined register. Please see FlexLEDSetup1, page 230 for the details.
JVL Industri Elektronik A/S - User Manual - Integrated Stepper Motors MIS17x, 23x, 34x, 43x

LED indicators basic motor

Indicator overview
Unused but user configurable
Green Default
Green Motor not moving
Green Motor not in position Motor in position
Red No error
Green Power is not applied Power is applied to both
Motor in position
(can also be user configured)
Motor moving
(can also be user configured)
TT2344-01GB
Constant on
Only when user configured
Motor moving
-
motor and module.
Only MIS17x and MIS23x:
The LED will lit red constant-
ly if the supply is too low.
Blinking
Only when user configured
-
-
Error
-
53