JVL MIS17 Series User Manual page 137

5.11
5.11.4 Brake registers
2 registers in the motor are relevant for the operation of the brake.
One register makes it possible to disable the brake so that the motor can run freely re-
gardless which mode or condition the motor is in.
The other makes it possible to verify if the brake is active or passive.
5.11.5 Access from MacTalk
A field named "Disable brake" at the main tab in MacTalk makes it possible to disable the
brake.
In the status bar at the right side its also possible to see whether the brake is active or not.
JVL Industri Elektronik A/S - User Manual - Integrated Stepper Motors MIS17x, 23x, 34x, 43x
Electro Mechanical brake
137