JVL MIS17 Series User Manual page 83

4.1
4.1.6 Register Screen
TT2391-01GB
These registers can be used with FastMac commands. For example, the motor can run
to position P2 using velocity V2, acceleration/deceleration A2, running current T2, using
only a one byte command.
These values are not updated automatically. To update, place the cursor at the specific
register value to the left of the box for new values, and click. Otherwise they only update
at motor reset or power up.
When relative moves are made using the MOVE command it uses the Position 1 (P1) reg-
ister.
JVL Industri Elektronik A/S - User Manual - Integrated Stepper Motors MIS17x, 23x, 34x, 43x
Using the MacTalk software
83