JVL MIS17 Series User Manual page 80

4.1
4.1.3 Saving or opening a setup file to/from PC
The complete motor setup can be saved to PC or
opened from PC and transferred to the motor.
Saving and opening a file over a network is also possible.
The setup files use the extension MAC.
By default, the setup files are saved in the same directory
in which MacTalk itself is also installed.
Other directories can be selected.
In case a motor is present and a PC file is opened the user is prompted for keeping the
connection or going offline and displaying the file-content.
The following message box appears.
If the user decides to go offline the following text box is presented.
Pressing "OK" disconnects the motor from the PC-application and all data can be edited
without any interruption in the motor.
80 JVL Industri Elektronik A/S - User Manual - Integrated Stepper Motors MIS17x, 23x, 34x, 43x
Using the MacTalk software