JVL MIS17 Series User Manual page 81

4.1 Using the MacTalk software
The following MacTalk view is presented.
As seen in the bottom info line, the motor is disconnected and the file data is currently
present in Mactalk. To re-establish communication with the motor, simply press the
"Go Online" -button and if any data has been changed a warning box appears enabling
the user to save current data before re-establishing communication with the motor as
this will overwrite existing data in MacTalk.
If data is changed in MacTalk the user is warned that current data in MacTalk may be
overwritten and needs to be saved. The following warning box is presented.
Choosing "No" will immediately upload all motor data, pressing "yes" will save all data
in the open file.
JVL Industri Elektronik A/S - User Manual - Integrated Stepper Motors MIS17x, 23x, 34x, 43x 81