JVL MIS17 Series User Manual page 2

Important
User Information
!
The MIS and SMC series of products are used to control electrical
and mechanical components of motion control systems.
You should test your motion system for safety under all potential
conditions. Failure to do so can result in damage to equipment
and/or serious injury to personnel.
Please contact your nearest JVL representative for technical assistance. Your
nearest contact can be found on our web site www.jvl.dk

Copyright 1998-2019, JVL Industri Elektronik A/S. All rights reserved.
This user manual must not be reproduced in any form without prior written
permission of JVL Industri Elektronik A/S.
JVL Industri Elektronik A/S reserves the right to make changes to informa-
tion contained in this manual without prior notice.
Furthermore JVL Industri Elektronik A/S assumes no liability for printing er-
rors or other omissions or discrepancies in this user manual.
MacTalk and MotoWare are registered trademarks
JVL Industri Elektronik A/S
Internet:
Warning
Bregnerødvej 127
DK-3460 Birkerød
Denmark
Tlf. +45 45 82 44 40
Fax. +45 45 82 55 50
e-mail: jvl@jvl.dk
http://www.jvl.dk
!