JVL MIS17 Series User Manual page 19

2.1
2.1.10 UL applications
If the motor is used in an application which is to be UL approved following must be fol-
lowed.
1. Supply voltage (P+): Do not use a supply voltage higher than 60VDC
2. Place a UL approved fuse in the P+ wire.
3. Make sure the motor is properly connected to a solid protective earth.
4. The surounding ambient temperature must maximum be 40'C.
Notice that only the MIS34x family is UL recognized under UL file no:
JVL Industri Elektronik A/S - User Manual - Integrated Stepper Motors MIS17x, 23x, 34x, 43x
Power Supply
E254947
19