®
ABB i-bus
KNX
Parameters
7.5
Channel function parameter window
Fig. 11: Channel function parameter window
7.5.1
Heating/cooling mode after bus voltage recovery
Options:
This parameter is used to specify the mode (heating or cooling) in which the device is to be after bus
voltage recovery.
•
As before bus voltage failure: The device is in the same mode as before bus voltage failure.
•
Heating: The device is in the heating mode after bus voltage recovery.
•
Cooling: The device is in the cooling mode after bus voltage recovery.
66 2CDC508220D0211 Rev. A | VC/S 4.x.1
As before bus voltage failure
Heating
Cooling