Generic Up-Down Counter Ctr; Identification; Function Block; Functionality - ABB 615 series Technical Manual

Section 3
Basic functions
Parameter Values (Range)
Operation mode 0=Pulsed
1=Toggle
-1=Off
Pulse length 10...3600000
Description
Operation mode 0=Pulsed
1=Toggle
-1=Off
Pulse length 10...3600000
Description
3.17.12
3.17.12.1
3.17.12.2
3.17.12.3
196
Unit Step
ms 10
ms 10

Generic up-down counter CTR

Identification

Function description
Generic up-down counter

Function block

GUID-222CC574-D72D-4426-876C-526D7C264C1E V1 EN
Figure 99: Function block

Functionality

The multipurpose generic up-down counter function CTR counts up or down for each
positive edge of the corresponding inputs. The counter value output can be reset to zero or
preset to some other value if required.
The function provides up-count and down-count status outputs, which specify the relation
of the counter value to a loaded preset value and to zero respectively.
Default Description
-1=Off Operation mode for generic control point
1000 Pulse length for pulsed operation mode
SPCGAPC1 Generic control point description
Output 15
-1=Off Operation mode for generic control point
1000 Pulse length for pulsed operation mode
SPCGAPC1 Generic control point description
Output 16
IEC 61850 IEC 60617
identification identification
UDFCNT UDCNT
1MAC059074-MB A
ANSI/IEEE C37.2
device number
CTR
615 series ANSI
Technical Manual