Monitored Data - ABB 615 series Technical Manual

1MAC059074-MB A
Table 680: 50BF Non group settings (Advanced)
Parameter Values (Range)
CB fault delay 0...60000
Measurement mode 2=DFT
3=Peak-to-Peak
Trip pulse time 0...60000
Pickup latching mode 1=Rising edge
2=Level sensitive
5.2.8
5.2.9
5.2.10
615 series ANSI
Technical Manual
Unit Step
ms 10
ms 10

Monitored data

Table 681: 50BF Monitored data
Name Type
50BF Enum
Technical data
Table 682: 50BF Technical data
Characteristic
Operation accuracy
Trip time accuracy
Reset time
Retardation time
Technical revision history
Table 683: 50BF Technical revision history
Technical revision
B
C
D
E
Protection related functions
Default Description
5000 Circuit breaker faulty delay
3=Peak-to-Peak Phase current measurement mode of function
200 Pulse length of retrip and backup trip outputs
1=Rising edge Pickup reset delayed or immediately
Values (Range) Unit
1=Enabled
2=blocked
3=test
4=test/blocked
5=Disabled
Value
Depending on the frequency of the measured
current: f ±2 Hz
n
±1.5% of the set value or ±0.002 × I
±1.0% of the set value or ±20 ms
Typically 40 ms
<20 ms
Change
Default trip pulse time changed to 150 ms
Added new setting parameter
Maximum value changed to 2.00 xIn for the
value setting.
Internal improvement.
Maximum value for
Res changed from "1.00 x In" to "2.00 x In".
Section 5
Description
Status
n
Pickup latching mode .
Current
Current value and Current value
783