ABB Relion 615 Series Quick Start Manual

Hide thumbs Also See for Relion 615 Series:

Download this manual

—

Quick Start Guide

Relion® 615 series

Display

Self-supervision and

protection indicator LEDs

Programmable LEDs

Control Circuit Breaker (CB)

Escape / Cancel

Navigation

Enter / Select

Authorization

Clear

Local / Remote

Help

Default view can be selected from single line diagram (SLD), measurements and main menu

Ready-LED steady: OK, Ready-LED flashing: Internal Relay Fault (IRF),

Start-LED steady: protection started, Start-LED flashing: protection function blocked,

Trip-LED: protection operated

Can be programmed for alarming and indication with latching and/or flashing features

Press open/close and confirm by pressing enter. If there is more than one controllable object

select the object first with navigation buttons. Note: control has to be in Local mode.

Used for canceling actions and leaving setting mode without saving the values.

Returns back to menu.

Left = go back, Right = go further, Up = scroll up, Down = scroll down.

Up/down can also be used when selecting controllable objects like breakers and

switches in single line diagram.

Entering to parameter setting mode and confirming new values

If authorization is used you can log in or log out using this button

Clearing events and indications, see next page for further details

Switch views in between the main menu, single line diagram and measurements

Changes the control between Local/Remote

View help messages

Page 1 — Quick Start Guide Relion® 615 series Display Default view can be selected from single line diagram (SLD), measurements and main menu Self-supervision and Ready-LED steady: OK, Ready-LED flashing: Internal Relay Fault (IRF), protection indicator LEDs Start-LED steady: protection started, Start-LED flashing: protection function blocked, Trip-LED: protection operated Programmable LEDs Can be programmed for alarming and indication with latching and/or flashing features...
Page 2 A (Administrator) appears to the right upper corner. If authentication is enabled you need to login and then change the contrast. Complete customer documentation is available in the product pages that can be accessed through abb.com/relion.
Page 3 Q U I C K S TA R T G U I D E R E L I O N ® 6 1 5 S E R I E S — Function block naming The most common function blocks are listed below, see the full list from the operators manual. Available function blocks varies depending on the selected IED and standard configuration.
Page 4 With regard to purchase orders, illustrations contained therein. Any reproduction, disclosure to third the agreed particulars shall prevail. ABB does not accept any responsibility parties or utilization of its contents – in whole or in parts – is forbidden whatsoever for potential errors or possible lack of information in this without prior written consent of ABB.