Monitored Data - ABB 615 series Technical Manual

1MAC059074-MB A
Table 561: 24 Non group settings (Basic)
Parameter Values (Range)
Operation 1=enable
5=disable
Cooling time 5...10000
Constant delay 100...120000
Maximum trip time 500000...10000000
Voltage selection 1=phase-to-earth
2=phase-to-phase
3=pos sequence
Phase selection 1=A or AB
2=B or BC
3=C or CA
Leakage React 0.0...50.0
Voltage Max Cont 80...160
Table 562: 24 Non group settings (Advanced)
Parameter Values (Range)
Reset delay time 0...60000
Minimum trip time 200...60000
4.5.6.9
615 series ANSI
Technical Manual
Unit Step
s 1
ms 10
ms 10
% 0.1
% 1
Unit Step
ms 10
ms 10

Monitored data

Table 563: 24 Monitored data
Name Type
PICKUP_DUR FLOAT32
T_ENARESTART INT32
VOLTPERHZ FLOAT32
24 Enum
Default Description
1=enable Operation Mode Disable/Enable
600 Time required to cool the machine
800 Parameter constant delay
1000000 Maximum trip time for IDMT curves
3=pos sequence Selection of phase / phase-to-phase / pos
sequence voltages
1=A or AB Parameter for phase selection
0.0 Leakage reactance of the machine
110 Maximum allowed continuous operating
voltage ratio
Default Description
100 Resetting time of the trip time counter in DT
mode
200 Minimum trip time for IDMT curves
Values (Range) Unit
0.00...100.00 %
0...10000 s
0.00...10.00 pu
1=Enabled
2=blocked
3=test
4=test/blocked
5=Disabled
Section 4
Protection functions
Description
Ratio of pickup time / trip time
(in %)
Estimated time to reset of
block restart
Excitation level, i.e U/f ratio or
Volts/Hertz
Status
657