Led Indication Control; Function Block - ABB 615 series Technical Manual

Section 3
Basic functions
3.3
3.3.1
74
Warning indication Warning code
Warning
AFL error
Warning
SMV config error
Warning
Comm. channel down
Warning
Unack card comp.
Warning
Protection comm.
Warning
ARC1 cont. light
Warning
ARC2 cont. light
Warning
ARC3 cont. light
Warning
RTD card error,X130
Warning
RTD meas. error,X130
For further information on warning indications, see the operation manual.

LED indication control

Function block

GUID-B5D22C6D-951D-4F34-BE68-F5AF08580140 V2 EN
Figure 10: Function block
Additional information
33 Analog channel configuration error.
34 Error in the SMV configuration.
35 Redundant Ethernet (HSR/PRP)
communication interrupted.
40 A new composition has not been
acknowledged/accepted.
50 Error in protection communication.
85 A continuous light has been detected on
the ARC light input 1.
86 A continuous light has been detected on
the ARC light input 2.
87 A continuous light has been detected on
the ARC light input 3.
96 Temporary error occurred in RTD card
located in slot X130.
106 Measurement error in RTD card located in
slot X130.
1MAC059074-MB A
615 series ANSI
Technical Manual