Changing The Country Code; Applying The Network's Rf Auto-Tuning Settings To The Network Plan - 3Com WX1200 Reference Manual

Changing the
Country Code
Applying the
Network's RF
Auto-Tuning
Settings to the
Network Plan
The country code determines the valid radio types as well as channel
numbers and power settings for MAP radios. The country code is one of
the parameters you set when you create a network plan. If you need to
change a plan's country code, use the following procedure.
1 Select the Configuration tool bar option.
2 In the Organizer panel, select the network plan name.
3 In the Task List panel, select Country Code. The Change Country Code
wizard appears.
4 Select the country code from the drop-down list.
5 Click Next.
3WXM changes the country code on all the WX switches in the network
plan, and lists its progress as it does so.
6 Click Finish.
If RF Auto-Tuning is running on MAP radios in the network, you can
update the radios in the network plan with the channel and power
settings currently in effect on the same radios in the network. You also
can lock down the channel and power settings in the plan and in the
network by disabling RF Auto-Tuning on the radios.
RF Auto-Tuning settings are applied only to configured MAPs, not to
Auto DAPs (Distributed MAPs configured using a Distributed MAP
profile).
This option also disables RF Auto-Tuning on the radios. When
RF Auto-Tuning is disabled, the channel and power settings on the radios
are static.
1 Select the Configuration tool bar option.
2 In the Organizer panel, select the network plan name.
3 In the Task List panel, select Auto-Tune Settings. The Apply Auto-Tune
Settings wizard appears.
4 Select the RF Auto-Tuning settings you want to apply. Both channel and
power settings are selected by default.

Changing the Country Code

67