Front Cover Open/Closed Detecting Switch - Canon imagerunner C5180 Service Manual

Chapter 12
7) Remove the DC controller mounting.
7-1) Remove all connectors from the PCB, and free
all harnesses from the cable clamps; then,
remove the 7 screws [1], and remove the DC
controller PCB [2] together with its base.
F-12-102
8) Remove the registration unit open/closed sensor
mounting [3].
- 4 connectors [1]
- 1 screw [2]
[3] [1]
[1]
F-12-103
12-48
[1]
[2]
12.5.26.2 Removing the Manual Feed Unit
Open/Close Switch
1) Remove the manual feeder unit open/close switch
[2].
- 1 screw [1]
F-12-104
12.5.27 Front Cover Open/Closed
Detecting Switch
12.5.27.1 Preparation for Removing the
Front Cover Open/Close Switch
1) Remove the control
30)Reference[Removing the Control Panel]
2) Remove the inside cover (upper).(page 12-
23)Reference[Removing
(Upper)]
3) Remove the rear upper cover.(page 12-
22)Reference[Removing the Rear Upper Cover]
4) Remove the rear lower cover.(page 12-
23)Reference[Removing the Rear Lower Cover]
5) Remove the left rear cover (upper).(page 12-
21)Reference[Removing the Left Rear Cover
(Upper)]
6) Remove the DC controller PCB cover [2].
(Referring to procedure 12.5.24.1)
7) Remove the DC controller mounting.
7-1) Remove all connectors from the PCB, and free
all harnesses from the cable clamps; then,
remove the 7 screws [1], and remove the DC
controller PCB [2] together with its base.
12-
panel.(page
the Inside Cover