Face-Down Delivery Sensor 2 - Canon imagerunner C5180 Service Manual

10.10.55 Face-Down Delivery Sensor
2
10.10.55.1 Removing the Face-Down
Delivery Sensor 2
1) Remove the upper left cover. (page 12-
23)Reference[Removing the Upper Left Cover]
2) Remove the center delivery tray [2].
(Referring to procedure 10.10.54)
3) Remove the delivery vertical path unit. (page 10-
93)Reference[Removing the Delivery Vertical
Path Unit]
10.10.55.2 Removing the Face-Down
Delivery Sensor 2
1) Remove the face-down delivery motor mounting
plate. (page 10-102)Reference[Removing the
Face-Down Delivery Motor]
2) Remove the delivery vertical path motor. (page
10-103)Reference[Removing
Vertical Path Motor]
3) Remove the motor mount [2].
- 4 Screws [1]
[1] [2]
F-10-290
4) Remove the face-down delivery sensor 2 [3].
- 1 Sensor plug [1]
- 1 Connector [2]
the Delivery
[1]
[3]
[2]
F-10-291
Points to Note When Attaching the Sensor
Flag
When attaching the sensor flag [1], hook one end of
the inside spring [2] and hook the other end on the
flag.
F-10-292
Chapter 10
[1]
10-105