Canon imagerunner C5180 Service Manual page 391

Chapter 10
F-10-140
10.10.28.2 Removing the Vertical Path
Roller
1) Free the claw [A] of the gear [1] at the rear, and
remove the gear and the bushing [2].
F-10-141
10-64
2) Free the claw [A] of the bushing [1] at the front;
move the vertical path roller [2] to the rear and
then pull it upward to remove.
F-10-142
10.10.28.3 Points to Note When Mounting
the Pickup System Sensor Mounting
Plate
Points to Note When Mounting the Sensor
Mounting Plate
Any of the gears can drop off. When attaching the
sensor mounting plate, be sure that the pickup unit
will not face downward.
1) Remove the E-ring and the gear [1].
F-10-143