Canon imagerunner C5180 Service Manual page 702

15. MISC
Sub item
SEG-ADJ Used to adjust the text and photo separation level for text/photo/map mode.
Adjustment method
- To make documents more easily recognized as photo documents, increase the setting value.
- To make documents more easily recognized as text documents, decrease the setting value.
Adjustment range -4to 4 (Value at time of factory shipment/value after RAM clear: 0)
K-ADJ Used to adjust the black recognition level during black text processing.
Adjustment method
- To make text more easily recognized as black, increase the setting value.
Adjustment range -3to 3 (Value at time of factory shipment/value after RAM clear: 0)
ACS-ADJ Used to adjust the color recognition level during ACS mode.
Adjustment method
To make documents more easily recognized as black and white documents, increase the setting
value.
- To make documents more easily recognized as color documents, decrease the setting value.
Adjustment range -3to 3 (Value at time of factory shipment/value after RAM clear: 0)
ACS-EN - ACS-EN (Used to adjust ACS recognition zone.)
Increasing the setting value expands the recognition zone.
ACS-CNT - ACS-CNT (Used to adjust color recognition pixel count zone during ACS recognition.)
Increasing the setting value expands the recognition zone.
ACS-EN2 ACS judgement area adjustment (with DF stream reading)
Adjustment method
Increasing the setting value increases the judgement range.
Setting range: -2 to 2
[Factory settings and after RAM clear: 1]
ACS-CNT2 Colour judgement pixel count area adjustment in ACS judgement (with DF stream reading)
Adjustment method
Increasing the setting value increases the judgement range.
Setting range: -2 to 2
[Factory settings and after RAM clear: 0]
REOS-PG REOS processing coefficient selection in 1200 dpi
Setting range: 0 to 4
[Factory settings and after RAM clear: 0]
T-19-42
COPIER>ADJUST>MISC
Description
Chapter 19
level.
1
1
1
2
2
2
2
2
19-57