Table of Contents
Advertisement
Sub item
DEBUG-1
Specify timing with which log types and logs are to be stored on HDD.
Specifies timing with which log types and logs are to be stored on HDD.
Setting range
0: Saves PLOG when Reboot/Exception is detected.
1: Saves PLOG when Reboot/Exception/Encode is detected.
2: Saves SUBLOG when Reboot/Exception/Encode is detected.
3: Saves SUBLOG in overwrite mode when Reboot/Exception/Encode is detected.
[Factory settings and after RAM clear: 0]
Note:
When 0 or 1 is set, the saved PLOG can be printed out with the sequence
COPIER>FUNCTION>SYSTEM>DEBUG-2. When 2 or 3 is set, the saved SUBLOG cannot
be printed out. (Upload from SST.)
DEBUG-2
Prints out logs saved on HDD.
When 0 or 1 is set in the sequence COPIER>FUNCTION>SYSTEM>DEBUG-1, the saved
PLOG is printed out.
Note:
When 2 or 3 is set in the sequence COPIER>FUNCTION>SYSTEM>DEBUG-1, the saved
SUBLOG is not printed out. Up to around 20 sheets of A4 can be printed out.
19.4.2 FEEDER
19.4.2.1 FEEDER Table
Sub item
SENS-INT
Use it to adjust the sensitivity of the individual sensors of the feeder.
Select the item, and press the OK key to start feeder sensor initialization, turning the screen
indication to 'ACT'. The operation will end automatically, turning the indication to 'OK'.
MTR-CHK
Use it to check the motor and the like of the ADF on its own.
Operation
1) Press [MOTOR-CHK] to highlight.
2) Enter the number of the component using the keypad.
3) Press the OK key.
4) Press [MOTOR-ON[ to start checking the operation.
Settings
0: pickup motor
1: feed motor
2: delivery reversal motor
3: lock motor
[Factory default/After RAM clear: 0]
TRY-A4
Use it to execute automatic adjustment (A4 Width) for DF original paper width detection.
TRY-A5R
Use it to execute automatic adjustment (A5R width) for DF original paper width detection.
TRY-LTR
Use it to execute automatic adjustment (LTR width) for DF original paper width detection.
TRY-LTRR
Use it to execute automatic adjustment (LTR-R width) for DF original paper width detention.
COPIER>FUNCTION>SYSTEM
Description
T-19-57
FEEDER>FUNCTION
Description
Chapter 19
level.
2
2
level.
1
1
1
1
1
1
19-71
Advertisement
Chapters
Table of Contents
