Parts Replacement Procedure; Adf; Removing The Adf; External Covers - Canon ImageRUNNER 1022iF Service Manual

Chapter 10

10.4 Parts Replacement Procedure

10.4.1 ADF

10.4.1.1 Removing the ADF

/ / / / iR1018 / iR1018J / / iR1022A / iR1022F / iR1022i / iR1022iF /
1) Remove one screw [1], and then detach the reader rear cover (small).
F-10-12
2) Remove the three connectors [1] and one screw [2] to disconnect the cable
[3].
[3]
[2]
F-10-13
3) Open the ADF [1] vertically, and remove it by lifting upward.
[1]
F-10-14

10.4.2 External Covers

10.4.2.1 Removing the Front Cover
/ / / / iR1018 / iR1018J / / iR1022A / iR1022F / iR1022i / iR1022iF /
1) Remove the two screws [1], release two hooks [2], and then detach the
front cover [3].
10-8
0013-1245
[1]
[1]
0013-1246
[3]
[2]
F-10-15

10.4.2.2 Removing the Rear Cover

/ / / / iR1018 / iR1018J / / iR1022A / iR1022F / iR1022i / iR1022iF /
1) Remove the stopper screw [1].
2) Open the pickup tray, remove the screw [2], and then detach the rear cover
[3].
F-10-16

10.4.2.3 Detaching the Open/Close cover

/ / / / iR1018 / iR1018J / / iR1022A / iR1022F / iR1022i / iR1022iF /
1) Remove the screw [1], and then remove the stopper.
2) Remove the front and rear shafts [2] of the open/close cover, and then
detach this cover [3].
[1]
[1]
[3]
[2]
0013-1247
0013-1248