Counter (Counter Mode) - Canon imagerunner C5180 Service Manual

2. USER
Sub item
COPY-LIM Used to change upper limit value setting for number of sheets to copy.
Setting values
1 to 999 sheets [Factory default/After RAM clear: 999]
SLEEP Used to turn sleep function ON/OFF.
Setting values
0: OFF
1: ON [Factory default/After RAM clear]
Reference:
The sleep function is set by the timer setting in the "User mode"
COUNTER 1 Used to change the counter type display for the operation panel's software counter 2, to meet
user or dealer requirements.
Reference:
Lets you change the counter data to meet user or dealer requirements.
Setting values 0 to 999 [Factory default/After RAM clear: 108]
COUNTER 2 Used to change the counter type display for the operation panel's software counter 2, to meet
user or dealer requirements.
Reference:
Lets you change the counter data to meet user or dealer requirements.
Setting values 0 to 999 [Factory default/After RAM clear: 108]
COUNTER 3 Used to change the counter type display for the operation panel's software counter 3, to meet
user or dealer requirements.
Reference:
Lets you change the counter data to meet user or dealer requirements.
Setting values 0 to 999 [Factory default/After RAM clear: 232]
COUNTER 4 Used to change the counter type display for the operation panel's software counter 4, to meet
user or dealer requirements.
Reference:
Lets you change the counter data to meet user or dealer requirements.
Setting values 0 to 999 [Factory default/After RAM clear: 324]
COUNTER 5 Used to change the counter type display for the operation panel's software counter 5, to meet
user or dealer requirements.
Reference:
Lets you change the counter data to meet user or dealer requirements.
Setting values 0 to 999 [Factory default/After RAM clear: 000]
COUNTER 6 Used to change the counter type display for the operation panel's software counter 6, to meet
user or dealer requirements.
Reference:
Lets you change the counter data to meet user or dealer requirements.
Setting values 0 to 999 [Factory default/After RAM clear: 000]
CONTROL Used to initialize the transmission reading setting.
Setting values
When connecting with the account-managing device (e.g., coin vendor, non-Canon control
card), it switches over the count pulse (on/off) in the account-managing device.
0: Not restricted [Factory default/After RAM clear]
1: Restricted
When charging against PDL prints, set '1'.
B4-L-CNT Used to select whether to count B4 size paper as large size or small size for software counters
1 to 6.
Setting values
0: Small size [Factory default/After RAM clear]
1: Large size
T-19-59
COPIER>OPTION>USER
Specification selection related to user mode
Description
Chapter 19
level.
1
1
1
1
1
1
1
1
1
1
19-93