Chapter 10
3) Remove the fixing feeding unit cover.
3-1) Release the link [4].
- screw [1] at the rear
- 1 grounding wire [2]
- 1 E-ring [3]
[4]
[2]
F-10-178
3-2) Remove the fixing feeding unit cover.
- 1 screw [1] at the front
- 1 cover fixing pin [2]
F-10-179
10-74
[3]
[1]
4) Remove the gear mounting plate.
4-1) Remove the fixing stay found at the rear.
- 3 screws [1]
[2]
[1]
F-10-180
4-2) Remove the gear mounting plate [2].
- 2 screws [1]
[2]
[1]
F-10-181
[1]
[1]