Transfer Belt - Canon imagerunner C5180 Service Manual

9.9.8.2 Removing the Intermediate

Transfer Belt

1) Remove the belt cover [2].
- 4 screws [1]
When removing the belt cover [2], be careful not to
make flaws on the intermediate transfer belt.
[2]
F-9-77
2) Remove the varistor [2].
- screw [1]
F-9-78
[1]
3) Remove the transfer guide plate [2].
- screw [1]
When removing the transfer guide plate [2], be
careful not to make flaws on the intermediate
transfer belt.
F-9-79
4) Pull out the link plate (rear) [2].
- 4 screws [1] at the rear
F-9-80
Chapter 9
9-63