Canon imagerunner C5180 Service Manual page 465

Chapter 11
F-11-16
2. Total rotation time of the fixing assembly
When the pressure belt is separated and rotates for long period and at low speed (convenience store, etc), the
lifetimes of thermistor and thermoswitch may end. Total rotation time should be included in the condition of the
lifetime of the fixing unit.
Totaling displays E008-0001 when it will reach in 15,000 hours at the total rotation time.
The total rotation time includes the total time of standby mode (pressure belt detached), and print mode (pressure
belt unit pressed).
The number of the paper that passed through the fixing unit can be checked from the service mode below.
However, the count number shown by this service mode is not related to the life detection control. Still though,
it is recommended to check the data using this service mode to figure out the life of the fixing unit as it varies
depending on the idiosyncracy, or how it is used.
COPIER > COUNTER > DRBL-1 > FX-BLT-U
11-28