Waste Toner Detection Pcb - Canon imagerunner C5180 Service Manual

9.9.13.2 Removing the Toner Container
Drive Unit
1) Remove the toner container drive unit [3].
- 2 connectors [1]
- 3 screws [2]
F-9-106

9.9.14 Waste Toner Detection PCB

9.9.14.1 Preparation for Removing the
Waste Toner Detection PCB
1) Remove the waste toner container.
1-1) Open the front cover, and turn the intermediate
transfer unit releasing lever [1].
F-9-107
[1] [3]
[2]
1-2) Remove the waste toner container [2].
F-9-108
2) Remove the front
20)Reference[Removing the Front Cover]
3) Remove the intermediate transfer unit releasing
lever [2].
- 1 screw [1]
F-9-109
Chapter 9
cover. (page 12-
9-71