Chapter 19
Sub item
RGW-ADR
Specify URL of sales company server used in E-RDS
Sets sales company server URL.
CNT-DATE
Set timing of counter transmission to server
*1
Sets time and date for start of transmission of counter information to server, via E-RDS third party
extension function.
Setting range: YYYYMMDDHHMM (YYYY: year, MM: month, DD: date, HH: hours, MM:
minutes)
[Factory settings and after RAM clear::000000000000]
Note
This item is only displayed when the E-RDS third party extension function is enabled.Set timing of
counter transmission to server
Sets time and date for start of transmission of counter information to server, via E-RDS third party
extension function.
Setting range: YYYYMMDDHHMM (YYYY: year, MM: month, DD: date, HH: hours, MM:
minutes)
[Factory settings and after RAM clear:: 000000000000]
Note
This item is only displayed when the E-RDS third party extension function is enabled.
CNT-INTV
Set interval of counter transmission to server
*1
Sets transmission intervals for transmission of counter information to server, via E-RDS third party
extension function.
2. CCD
Sub item
DF-WLVL1/2
Use it to adjust the ADF white level.
Method of Operation
1) Place the type of original most often used by the user on the copyboard glass, and perform
the following service mode item: COPIER>FUNCTION>CCD>DF-WLVL1. (In response,
the machine will read the white level for book mode, checking the transmission quality of the
glass for book mode).
2) Place the type of original most often used by the user in the DF, and perform the following
service mode item: COPIER>FUNCTION>CCD>DF-WLVL2. (In response, the machine will
read the white level for DF mode (stream reading mode), checking the transmission quality of
the reading glass by reading both sides of the original.)
face reading: computes DFTAR-R/G/B
back reading: computes DFTAR2-R/G/B
Be sure to execute this item in combination with item 2.
19-60
COPIER>FUNCTION>INSTALL
Description
T-19-45
COPIER>FUNCTION>CCD
Description
level.
1
1
1
level.
1