Canon imagerunner C5180 Service Manual page 729

Chapter 19
BKTC- Countermeasures against fogged image due to Bk supply
DWN Settings:
0: OFF
1: ON [Factory default/After RAM clear: 0]
Set this mode to [1 (countermeasures: ON)] when fogged image due to Bk supply occurs.
SSH-SW SSH server ON/OFF
Settings
0: Sever is not started up
[Factory default/After RAM clear: 0]
1: Server is started up
The following modes also become ON when COPIER>OPTION>BODY>DA-CNCT is set to '1'.
COPIER>OPTION>BODY>CMD-PORT
COPIER>OPTION>BODY>SSH-SW
COPIER>OPTION>BODY>DA-PORT
RMT-LGIN ON/OFF setting of remote login operation to SSH server
Settings
0: Remote login operation to SSH server is disabled
[Factory default/After RAM clear]
1: Remote login operation to SSH server is enabled
RE-PKEY ON/OFF setting of SSH server key reproduction
Settings
0: SSH server key is not reproduced.
[Factory default/After RAM clear]
1: SSH server key is reproduced.
This mode is enabled only when COPIER>OPTION>BODY>SSH-SW is set to '1'.
U-NAME Use it to set a user name required to connect to the SSH server.
Sets a login user name required to connect to the SSH server. Only one user can login the server.
Setting range
8 characters maximum (English one byte characters)
[Factory default/After RAM clear: gN3Fp2A]
- Do not change this setting because this is for future expansion.
- This is valid only when "1 (ON)" is set to <SSH-SW>.
U-PASWD Use it to set a password of the user required to connect to the SSH server.
Sets a password of the login user required to connect to the SSH server.
Setting range
8 characters maximum (English one byte characters)
[Factory default/After RAM clear: Vs8DuwJ]
- Do not change this setting because this is for future expansion.
- This is valid only when "1 (ON)" is set to <SSH-SW>.
- The password is left hidden on the screen.
FXERRLVL Not used
DA-PORT Setting port for communication with DA
Settings
0: Close [Factory default/After RAM clear:0]
1: Open
The following modes also become ON when COPIER>OPTION>BODY>DA-CNCT is set to '1'.
COPIER>OPTION>BODY>STS-PORT
COPIER>OPTION>BODY>CMD-PORT
COPIER>OPTION>BODY>SSH-SW
COPIER>OPTION>BODY>DA-PORT
19-84
COPIER>OPTION>BODY
2
2
2
2
2
2
2