Table of Contents
Advertisement
UI-RSCAN
Control panel remote scan screen restriction
Switches between display and non display of control panel remote scan screen.
(Some users with customized control panels prefer not to display this screen.)
Setting values
0: No display
1: Display
[Factory settings and after RAM clear: 1]
UI-EPRNT
Control panel extension print screen display restriction
Switches between display and non display of control panel extension print screen (EFI print screen).
(Some users with customized control panels prefer not to display this screen.)
Setting values
0: No display
1: Display
[Factory settings and after RAM clear: 1]
UI-WEB
Control panel web browser screen display restriction
Switches between display and non display of control panel web browser screen.
(Some users with customized control panels prefer not to display this screen.)
Setting values
0: No display
1: Display
[Factory settings and after RAM clear: 1]
WEBV-SW Control panel hold job screen display restriction
Switches between display and non display of control panel hold job screen.
(Some users with customized control panels prefer not to display this screen.)
Setting values
0: No display
1: Display
[Factory settings and after RAM clear: 1]
PASCL-TY Sets paper to be used with PASCAL (reader/ printer).
Sets type of paper to be used with PASCAL (reader/ printer).
Setting values (differs by region) (differs by region)
1: CLC-SK 80 g (for regions other than USA/ EU, mainly Japan)
2: Hammermill 105 g (for USA)
3: Neusiedler 100 g (for UK)
[Factory settings and after RAM clear: 1 (differs by region)]
CARD-
Sets number of card groups (no. of cards) that can be used.
RNG
Sets the number of card groups (no. of cards) that can be used with a card reader.
Setting range
1-1000
[Factory settings and after RAM clear: 1000]
Set the card starting number in COPIER> FUNCTION> INSTALL> CARD, then, in this mode, set
the number of card groups (no. of cards) that can be used with a card reader.
WUEN-LIV Sets start time after sleep notification from network.
Sets time in seconds till the copier main unit next enters sleep mode after sleep mode is initiated by
the network, irrespective of a new job.
Setting range
10-600 (Sec.)
Factory settings and after RAM clear: 15]
COPIER>OPTION>BODY
Chapter 19
2
2
2
2
2
2
2
19-89
Advertisement
Chapters
Table of Contents
