15.3.2 Scheduled Servicing (Reader Unit)
Do not use solvents or oils that are not indicated herein.
Unit name
Optical path
Points to Note About Scheduled Servicing
Unless otherwise specifically mentioned, use lint-free paper and alcohol for cleaning.
- If you used solvent for cleaning, be sure that the solvent has completely dried before mounting the part back
to the machine.
- Unless specifically mentioned, do not use a wet (moist) cloth for cleaning.
- See to it that scheduled servicing and replacement are conducted as indicated.
Scanning lamp
Dry wipe with lint-free paper.
Reflecting plate
Clean with a blower brush.
No. 1 through No. 3 mirror
Use a blower brush; if dirt
cannot be removed, dry wipe
with lint-free paper.
Face-down
delivery roller 1
Note: Unless otherwise indicated and for guides coming into
Location
Scanner rail
Copyboard glassÅiInside and outside sideÅj
No. 1 through No. 3 mirrors
Original reflecting plate
Original size sensor
Lens
ADF reader glassÅiInside and outside sideÅj
Scanner rail
Lubricate.
contact with paper, use lint-free paper and alcohol.
T-15-3
Cleaning
clean
clean
clean
clean
clean
clean
clean
Copyboard glass
Clean the face/back and white plate.
Lens
Use a blower brush.
F-15-3
Chapter 15
Remarks
if dirt is appreciable
if dirt is appreciable
if dirt is appreciable
if dirt is appreciable
if dirt is appreciable
if dirt is appreciable
if dirt is appreciable
Original size sensor
Use a blower brush.
15-5