Chapter 10
4) Pull out the manual feed roller [2].
- resin clamp [1]
When attaching the manual feed roller, be sure that
the groove of the parallel pin is toward the rear.
F-10-106
When attaching the bushing and the gear at the front,
check to be sure that the claw is hooked on the
groove of the roller.
F-10-107
10-54
10.10.18 Manual Feed Separation
Roller
10.10.18.1 Preparation for Removing the
Manual Feed Separation Roller
1) Remove the manual feed unit. (page 10-
52)Reference[Removing the Manual Feed Unit]
2) Remove the manual feed unit cover. (page 12-
28)Reference[Removing the Manual Feed Unit
Cover]
3) Remove the motor cover.
3-1) Remove the motor cover [2] at the rear.
- 1 screw [1]
[1]
F-10-108
4) Remove the manual feed roller. (page 10-
53)Reference[Removing
Roller]
5) Remove the manual feed tray unit. (page 10-
52)Reference[Removing the Manual Feed Tray
Unit]
[2]
the
Manual
Feed