Canon imagerunner C5180 Service Manual page 727

Chapter 19
OHP-PTH use it to set the number of copies to be used for ITB cleaning sequence, occurring following the
passage of a transparency
Setting values: 15 [Factory default/After RAM clear]
Settings: 0 to 100
Reference: if Type E transparencies are used in a high humidity environment, '2' is recommended
DEVL-FAN Used to switch the paper feeding speed when using the delivery vertical path.
Whenever possible, avoid using this setting during normal operation.use it to enable/disable the
delivery cooling fan (FM5)
0: disable regardless of paper type [Factory default/After RAM clear]
1: enable only if plain paper
Reference:
if any of the following occurs, '1' is recommended
- traces of the FU/FD switching flapper (when FD delivery is used for an image with a high color ratio
at the trailing edge; on a simplex model)
- traces of the FU/FD switching flapper (when FD delivery is used for an image with a high color ratio
at the trailing edge; on a simplex model)
- poor stacking in FU delivery (duplex model only)
- dropouts on the trailing edge of a 2nd side in the morning (after being left alone for a long time; high
humidity environment only)
CTM- Used to switch the paper feeding speed when using the delivery vertical path.
MARK Whenever possible, avoid using this setting during normal operation.
UISW-DSP switch appearing on the User screen
use it to enable/disable the indication of the switch used to switch between Standard Setup screen and
Simplified setup screen (e.g., for Lawson, self-copy shop)
0: disable indication of switch [Factory default/After RAM clear]
1: enable indication of switch
Reference:
a model supporting a coin vendor mechanism may come equipped with functions equivalent to those
of a limited function model (Lawson)/standard model
CLR-SHFT use it to correct color displacement on heavy paper
0: disable remedy [Factory default/After RAM clear]
1: enable remedy
Reference: negative effects of '1'
- the productivity for heavy paper will drop (to about 1/3)
ITB-CLN use it to implement a remedy for uneven density in horizontal direction (dropout)
0: disable remedy
1: enable remedy [Factory default/After RAM clear]
NS-CMD5 Use it to set CRAM-MD5 authentication under SMTP authentication.
setting
0: dependent on SMTP server
1: disable
NS-GSAPI Use it to set GSSAPI authentication under SMTP authentication.
setting
0: dependent on SMTP server
1: disable
NS-NTLM Use it to set NTLM authentication under SMTP authentication.
setting
0: dependent on SMTP server
1: disable it
NS-PLNWS Use it to set PLAIN LOGIN authentication under SMTP authentication.
<environment in which communication packets are subjected to coding>
setting
0: dependent on SMTP server
1: disable
19-82
COPIER>OPTION>BODY
2
2
2
2
2
2
2
2
2
2