F-10-116
10.10.20 Manual Feed Sensor
10.10.20.1 Preparation for Removing the
Manual Feed sensor
1) Remove the manual feed unit. (page 10-
52)Reference[Removing the Manual Feed Unit]
2) Remove the manual feed unit cover. (page 12-
28)Reference[Removing the Manual Feed Unit
Cover]
3) Remove the manual feed roller. (page 10-
53)Reference[Removing
Roller]
4) Remove the motor cover.
4-1) Remove the motor cover [2] at the rear.
- screw [1]
[1]
F-10-117
5) Remove the manual feeder tray unit.(page 10-
52)Reference[Removing the Manual Feed Tray
Unit]
the
Manual
Feed
[2]
10.10.20.2 Removing the Manual Feed
sensor
1) Remove the face plate [1].
(Referring to procedure 10.10.18)
2) Remove the rear guide [1] and the middle guide
[2]. (Free the snap-in claw.)
(Referring to procedure 10.10.18)
3) Remove the sensor flag [2] attached to the middle
guide [1].
F-10-118
4) Remove the manual feed paper sensor [2].
- connector [1] from behind the middle guide
F-10-119
Chapter 10
10-57