3) Free the harness from the harness guide [2].
- 2 connectors [1]
[2]
[1]
F-11-30
4) Remove the harness guide [1]ÅiMove it to the
side, and detach it by freeing it from the pinÅj.
F-11-31
[1]
When moving the sensor unit, take care not to
remove the screws glued in place.
5) Move the fixing belt position sensor unit [2].
- 2 screws [1]
[1]
F-11-32
Points to Note When Mounting the Sensor
Flag
Check to be sure that the sensor flag (bar) [2] is in
contact with the edge of the belt [1].
[2]
F-11-33
Chapter 11
[2]
[1]
[1]
11-35