Table of Contents
Advertisement
Chapter 20
4) By following the display on the control panel, press key.
[6] -> [0]: Execution of clear / Keys other than [0]: Return to the menu screen
After the execution, the message prompting to turn OFF/ON the power supply is displayed.
5) Turn OFF the main power switch, and remove the USB memory. Then, turn ON the main power switch.
[7]: Clear downloaded files
Clear the system software stored in the temporary storage area in HDD. This function can be used after the
system software download (Menu [2] and [3]), and when clearing the file without writing in HDD.
<Procedure>
1) After the completion of the system software with Menu [2] and [3], execute the step 2) without turning OFF/
ON the power supply. If turning OFF the power supply, activate the machine in the safe mode.
2) By following the display on the control panel, press key.
[7] [0]: Execution / Keys other than [0]: Return to the menu screen
After the execution, it returns to the menu screen.
20-42
F-20-63
F-20-64
Advertisement
Chapters
Table of Contents
