Sleep Operation; Network Setting (Maintenance) - Canon imagerunner C5180 Service Manual

Log detailed screen
Detailed information of individual communication test error is displayed.
Refer to the displayed message to "Error message list".
It shifts to "Log list screen" by the [OK] button pressing.
Maximum length of error information: 128 characters (not include NULL)

14.1.9 Sleep operation

When there is a method that should be transmitted while e-RDS is operating (ON), e-RDS wakes from the state
of sleep and begins transmitting.

14.1.10 Network Setting (Maintenance)

You should do the network setting of Device appropriately before the e-RDS setting.
A. Display the Additional Functions screen.
- Press [Additional Functions (*)] key.
- Input ID code.
B. Display the TCP/IP Settings screen.
- Select (touch) [System Settings] > [Network Settings] > [TCP/IP Settings] on the Touch Panel Display.
C. Setting of items related to IP address
- Select (touch) [IP Address Settings] => IP Address Settings screen is displayed.
- Set each items such as IP Address, Subnet Mask, Gateway Addresses, and DHCP, etc.
- Return to the TCP/IP Settings screen by pushing the [OK] button after the setting ends.
D. DNS Settings
- Select (touch) [DNS Settings] => DNS Settings screen is displayed.
- Set necessary items.
- Return to the TCP/IP Settings screen by pushing the [OK] button after the setting ends.
F-14-3
Chapter 14
14-5