Table of Contents
Advertisement
Chapter 19
*If you replaced the laser scaner unit, enter the value on the laser scaner unit.
Sub item
LDADJ1-C*
A-B laser reproduction ratio (C)
B laser reproduction adjustment value (C) based on the A laser reproduction ratio of the laser
scanner unit
Unless an appropriate value is entered here, reproduction ratios of the laser A and B become
different, resulting in exposed images of different reproduction ratios.
Setting range: -512 ~ 511
[Factory default value /post-RAM clear value: 0]
LDADJ2-C*
A-C laser reproduction ratio (C)
C laser reproduction adjustment value (C) based on the A laser reproduction ratio of the laser
scanner unit
Unless an appropriate value is entered here, reproduction ratios of the laser A and C become
different, resulting in exposed images of different reproduction ratios.
Setting range: -512 ~ 511
[Factory default value /post-RAM clear value: 0]
LDADJ3-C*
A-D laser reproduction ratio (C)
D laser reproduction adjustment value (C) based on the A laser reproduction ratio of the laser
scanner unit
Unless an appropriate value is entered here, reproduction ratios of the laser A and D become
different, resulting in exposed images of different reproduction ratios.
Setting range: -512 ~ 511
[Factory default value /post-RAM clear value: 0]
LDADJ4-C*
A-B laser phase difference (C)
A-B inter-laser phase difference (exposure start timing) adjustment value (C) of the laser
scanner unit
Unless an appropriate value is entered here, A and B laser phases (exposure starting position)
become different, resulting in faulty exposed image
Setting range: 0 ~ 1023
[Factory default value /post-RAM clear value: 0]
LDADJ5-C*
A-C laser phase difference (C)
A-C inter-laser phase difference (exposure start timing) adjustment value (C) of the laser
scanner unit
Unless an appropriate value is entered here, A and C laser phases (exposure starting position)
become different, resulting in faulty exposed image
Setting range: 0 ~ 1023
[Factory default value /post-RAM clear value: 0]
LDADJ6-C*
A-D laser phase difference (C)
A-D inter-laser phase difference (exposure start timing) adjustment value (C) of the laser
scanner unit
Unless an appropriate value is entered here, A and D laser phases (exposure starting position)
become different, resulting in faulty exposed image
Setting range: 0 ~ 1023
[Factory default value /post-RAM clear value: 0]
LDADJ1-K*
A-B laser reproduction ratio (Bk)
B laser reproduction adjustment value (Bk) based on the A laser reproduction ratio of the laser
scanner unit
Unless an appropriate value is entered here, reproduction ratios of the laser A and B become
different, resulting in exposed images of different reproduction ratios.
Setting range: -512 ~ 511
[Factory default value /post-RAM clear value: 0]
LDADJ2-K*
A-C laser reproduction ratio (Bk)
C laser reproduction adjustment value (Bk) based on the A laser reproduction ratio of the laser
scanner unit
Unless an appropriate value is entered here, reproduction ratios of the laser A and C become
different, resulting in exposed images of different reproduction ratios.
Setting range: -512 ~ 511
[Factory default value /post-RAM clear value: 0]
19-46
COPIER>ADJUST>LASER
Description
level.
1
1
1
1
1
1
1
1
Advertisement
Chapters
Table of Contents
