In Case Of Recovery From Sleep-Mode; At Low-Power/Power Save Mode - Canon imagerunner C5180 Service Manual

11.2.2.8 In case of recovery from sleep-mode

The system starts the same temperature controlling as that of the Power-On (Fixing belt less than 100deg C)
operation.

11.2.2.9 At Low-Power/Power Save Mode

This machine has the low power and power save mode for energy conservation.
Reducing energy consumption is possible by lowering the fixing belt temperature target and turning off the
pressure heater, respectively.
The following are the fixing belt temperature control, pressure heater ON/OFF and recovery time at lower
power/power save mode.
Mode Item
Power save Fixing belt temperature control (deg
mode C)
(-10%)
Pressure heater
Recovery time (sec)
Power save Fixing belt temperature control (deg
mode C)
(-25%)
Pressure heater
Recovery time (sec)
Power save Fixing belt temperature control (deg
mode C)
(-50%)
Pressure heater
Recovery time (sec)
Lower power Fixing belt temperature control (deg
mode C)
Pressure heater
Recovery time (sec)
*1: Copier/Multi-function copier
*2: 120 deg C for high-humidity environment (ROM temperature>/=27 deg C)
*3: 230/200/170sec are for 100V/120V/230V machines respectively.
T-11-20
iRC 5180
110/140*1
Off
170sec or
less
200
Off
Approx. 30 Approx. 30 Approx. 30
190
Off
Approx. 30 Approx. 30 Approx. 30
140
Off
Approx. 80 Approx. 80 Approx. 80
Chapter 11
Model
iRC 4580 iRC 4080
90/130*1 200
Off 140*2
230/200/
170sec or
less *3 -
200 200
Off Off
190 190
Off Off
140 140
Off Off
11-17